Accessory Decoders
Detector Board
The QuadLN_S Detector Board add-on provides 4 channels of current detection with individual channel sensitivity adjustments. Includes 4 detectors mounted on their own boards with screw terminal for easy wiring.
Plugs in the QuadLN_S Main IO... more ...
more info on Detector Board...This item is in Stock and available for dispatch
£41.00
DRIVER
QuadLN_S Stall Motor Driver Board
The QuadLN_S Stall Motor Driver Board add-on provides four 5 Volt outputs for driving Stall Motors, low current 5 Volt Relays and Servos. Includes four cables plus mounting screws and standoffs.
QuadLN_S Stall Motor Driver Board... more ...
more info on QuadLN_S Stall Motor Driver Board...This item is in Stock and available for dispatch
£10.00
FC_DIY
DIY Fascia Controller w/solder pads
Designed to make it as easy as possible to interface your own Pushbutton and LEDs to the QuadLN_S.
Handles up to two bi-color LEDs in common anode, common cathode or 2-lead form factor, or up to four single color... more ...
more info on DIY Fascia Controller w/solder pads...This item is in Stock and available for dispatch
£4.20
FC_DIY_6
Mini DIY Fascia Controller w/solder pads
The DIY Fascia Controller is also available in this smaller version that handles one bi-color LED in common anode, common cathode or 2-lead form factor, or two single color LEDs.
Designed to make it as easy as possible to interface your own... more ...
more info on Mini DIY Fascia Controller w/solder pads...This item is in Stock and available for dispatch
£3.80
FC_DIY_6_SCREW
Mini DIY Fascia Controller w/screw terminals
Designed to make it as easy as possible to interface your own Pushbutton and LEDs to the QuadLN_S.
Handles one bi-color LEDs in common anode, common cathode or 2-lead form factor, or two single color LEDs.
An on-board... more ...
more info on Mini DIY Fascia Controller w/screw terminals...This item is in Stock and available for dispatch
£4.75
FC_DIY_SCREW
DIY Fascia Controller w/screw terminals
Designed to make it as easy as possible to interface your own Pushbutton and LEDs to the QuadLN_S.
Handles up to two bi-color LEDs in common anode, common cathode or 2-lead form factor, or up to four single color... more ...
more info on DIY Fascia Controller w/screw terminals...This item is in Stock and available for dispatch
£5.30
QLNS
QuadLN Loconet Servo Driver
QLNS - Versatile, programmable servo driver and Loconet decoder
The QuadLN_S LocoNet® Servo Decoder is the heart of the system and handles servo control, inputs, outputs and LocoNet® communications. Provides complete turnout control of up to 16... more ...
Loconet - Compatible
more info on QuadLN Loconet Servo Driver...This item is in Stock and available for dispatch
£58.00
RELAY
QuadLN_S Relay Board
The QuadLN_S Relay Board contains a 5 Volt Relay with DPDT contacts along with drive electronics. The board uses a high sensitivity relay to minimize 5 Volt supply loading and permit many relays boards to be used with a single QuadLN_S. Includes a 12″... more ...
more info on QuadLN_S Relay Board...This item is in Stock and available for dispatch
£11.00
REM
QuadLN Remote Aligner
Used with the QuadLN for alignment of servos. Just one of these needed for all of your QuadLNs. Comes with a 6' cable which allows you to stand next to your turnout while aligning the servo
Adjust the travel of your Servos.
Set... more ...
more info on QuadLN Remote Aligner...Only 1 remaining in stock
£16.00
Signal Connector Interface Board
Allows Atlas® and other signals the use JST1.25-type connectors to be easily driven by the Signal Board. One Signal Connector Interface Board is used per signal head. Connects to the QuadLN_S Signal Board using separate 3-wire servo cables for the Red,... more ...
more info on Signal Connector Interface Board...This item is in Stock and available for dispatch
£23.10
Page (1) of (2)