Allows Atlas® and other signals the use JST1.25-type connectors to be easily driven by the Signal Board. One Signal Connector Interface Board is used per signal head. Connects to the QuadLN_S Signal Board using separate 3-wire servo cables for the Red, Yellow and Green LEDs to allow easy routing to any desired Signal Board outputs. An onboard jumper is provided to select either Common Anode (newer Atlas/BLMA) or Common Cathode (older Atlas) signal wiring. Built-in current limiting resistors are provided for each LED. Each Signal Connector Interface Board includes three 12″ cables that plug into the Signal Board. Increase the distance by adding standard servo extension cables.

Signal Connector Interface Boards are supplied in one panel of 6 individual boards and one panel of 2 individual boards. The panels can be snapped apart as desired into individual boards for one head signal maAllows Atlas® and other signals the use JST1.25-type connectors to be easily driven by the Signal Board. One Signal Connector Interface Board is used per signal head. Connects to the QuadLN_S Signal Board using separate 3-wire servo cables for the Red, Yellow and Green LEDs to allow easy routing to any desired Signal Board outputs. An onboard jumper is provided to select either Common Anode (newer Atlas/BLMA) or Common Cathode (older Atlas) signal wiring. Built-in current limiting resistors are provided for each LED. Each Signal Connector Interface Board includes three 12″ cables that plug into the Signal Board. Increase the distance by adding standard servo extension cables.

Signal Connector Interface Boards are supplied in one panel of 6 individual boards and one panel of 2 individual boards. The panels can be snapped apart as desired into individual boards for one head signal masts, two board sets for dual head masts, … The set of 8 boards can support 8 signal heads using all 24 outputs on one QuadLN_S Signal Board.

Manufacturer : N3IX
SKU : SCIB