NBZ001
Tam Valley - No-Buzz InLine Servo Quieter
This item is in Stock and available for dispatch
Our Price
£5.90
£5.90
Sometimes a servo will buzz or chatter continuously. Some poeple find this very annoying. The No-Buzz goes in line with the servo cord and quiets the servo. Here is how it works - if the servo is stopped in the same position for more than about a second the circuit turns off the servo. If the servo starts moving again it will turn it on and drive the servo until it stops again. When the servo is stopped the gears will hold most switches in place. A side benefit of the No-Buzz is that you do not need to adjust the servo as precisely but can overdrive the position and let the servo relax back after it turns off.
Note: The No-Buzz circuitry is built-in to the Octo III, the Micro Singlet and the Switchwright Board so this is not needed if you use them.
Note: The No-Buzz circuitry is built-in to the Octo III, the Micro Singlet and the Switchwright Board so this is not needed if you use them.
Manufacturer : Tam Valley
SKU : NBZ001
EAN :
SKU : NBZ001
EAN :