TCS - 28x18mm Micro Speaker w/Enclosure
This item is in Stock and available for dispatch
Our Price
£8.60
£8.60
This 28mm x 18mm speaker is a tough little beast capable of pumping out 1.2 Watts of clear and accurate audio. This micro speaker comes packaged inside a foam-padded enclosure to maximize the volume while preventing distortion caused by vibration. Truly an impressive speaker in a small package!
This speaker also comes from TCS with 6-inch (152mm) long 32AWG wire and a 2-pin JST "SR" connector. This connector can be clipped off if not needed, but can be readily plugged into some products such as the WM-MB1 and WM-MB2 motherboards.
Important Safety Note When Using This Speaker:
TCS WOWSound decoders use an audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will result in a more power (more Watts) being supplied to This 28mm x 18mm speaker is a tough little beast capable of pumping out 1.2 Watts of clear and accurate audio. This micro speaker comes packaged inside a foam-padded enclosure to maximize the volume while preventing distortion caused by vibration. Truly an impressive speaker in a small package!
This speaker also comes from TCS with 6-inch (152mm) long 32AWG wire and a 2-pin JST "SR" connector. This connector can be clipped off if not needed, but can be readily plugged into some products such as the WM-MB1 and WM-MB2 motherboards.
Important Safety Note When Using This Speaker:
TCS WOWSound decoders use an audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will result in a more power (more Watts) being supplied to the speaker. This speaker is rated at 6 Ohms of Impedance and 1.2 Watts of continuous power. (See "Specs" for more details) It is recommended that you set your master volume to ~60% or less to prevent over-driving and damage to your decoder or speaker.
This speaker also comes from TCS with 6-inch (152mm) long 32AWG wire and a 2-pin JST "SR" connector. This connector can be clipped off if not needed, but can be readily plugged into some products such as the WM-MB1 and WM-MB2 motherboards.
Important Safety Note When Using This Speaker:
TCS WOWSound decoders use an audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will result in a more power (more Watts) being supplied to This 28mm x 18mm speaker is a tough little beast capable of pumping out 1.2 Watts of clear and accurate audio. This micro speaker comes packaged inside a foam-padded enclosure to maximize the volume while preventing distortion caused by vibration. Truly an impressive speaker in a small package!
This speaker also comes from TCS with 6-inch (152mm) long 32AWG wire and a 2-pin JST "SR" connector. This connector can be clipped off if not needed, but can be readily plugged into some products such as the WM-MB1 and WM-MB2 motherboards.
Important Safety Note When Using This Speaker:
TCS WOWSound decoders use an audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will result in a more power (more Watts) being supplied to the speaker. This speaker is rated at 6 Ohms of Impedance and 1.2 Watts of continuous power. (See "Specs" for more details) It is recommended that you set your master volume to ~60% or less to prevent over-driving and damage to your decoder or speaker.
Impedance - 6 ohm
Manufacturer : TCS
SKU : 1717
EAN : 879508007220
SKU : 1717
EAN : 879508007220