Tam Valley - Accessories
FMS001
Fascia Mount Signlet Kit
Crossover Fascia Controller Mount
Made of precision 1/8" thick laser-cut acrylic, these mounts can be used to neatly mount your crossover fascia controllers. They are the same as the above fascia mount except they have a different hole pattern and are... more ...
more info on Fascia Mount Signlet Kit...This item is in Stock and available for dispatch
£2.95
NBZ001
No-Buzz InLine Servo Quieter
Sometimes a servo will buzz or chatter continuously. Some poeple find this very annoying. The No-Buzz goes in line with the servo cord and quiets the servo. Here is how it works - if the servo is stopped in the same position for more than about a... more ...
more info on No-Buzz InLine Servo Quieter...This item is in Stock and available for dispatch
£5.90
RTM001
Toggle Switch Mount
This item is in Stock and available for dispatch
£4.20
XCM001
Crossover FC Mount Kit
Crossover Fascia Controller Mount
Made of precision 1/8" thick laser-cut acrylic, these mounts can be used to neatly mount your crossover fascia controllers. They are the same as the above fascia mount except they have a different hole pattern and are... more ...
more info on Crossover FC Mount Kit...This item is in Stock and available for dispatch
£2.70
Fascia Controllers
FCB020RG
Fascia Controller Red/Grn
This fully assembled and ready to use controller mounts on the fascia or control panel. Use for manual throwing of your switches and also provides feedback on servo position when used with DCC/signals.
more info on Fascia Controller Red/Grn...This item is in Stock and available for dispatch
£5.60
FCB021G
4x Fascia Controller Grn/Grn
Only 1 remaining in stock
£11.50
FCR001
In-Line Reverser for Fascia Controller
You have the servo all lines up and then you find the fascia controller colors are reversed. You can use this handy board to reverse the colors.
more info on In-Line Reverser for Fascia Controller...This item is in Stock and available for dispatch
£3.70
XFC001KIT
Xover Fascia Ctlr Kit
This version of the fascia controller is designed to be used on single and double crossovers. It has 3 red/green bicolor LEDs arranged to indicate straight through (top and bottom green) and crossover (middle LED green). It has 2 output cabless to... more ...
more info on Xover Fascia Ctlr Kit...This item is in Stock and available for dispatch
£5.50
Octopus
DY5001
5V Remote DPDT Relay Board w/Y
A DPDT relay for using on a Y cable in conjunction with a fascia controller. (Will also work without the fascia controller.) Has a 6-pin connector block to simplify wiring.
more info on 5V Remote DPDT Relay Board w/Y...This item is in Stock and available for dispatch
£15.00
OCD001
Octocoder DCC Add-on Decoder
By adding this DCC stationary/accessory decoder to the Octopus you can control your turnouts with servos and DCC at the lowest possible cost per turnout. No frills just throws the turnouts from your throttle or JMRI.
more info on Octocoder DCC Add-on Decoder...Only 1 remaining in stock
£20.50
Page (1) of (2)